A Basic Guideline About Drip Irrigation System for Farmers

pipes for irrigation

Everybody knows that large quantities of water are necessary for food production, which becomes challenging due to the rising global population and climatic changes. The quantity of water is reducing and the agriculture sector consumes the water resource.

According to research, 70 percent of the freshwater supply from the world becomes applicable in the agricultural sector. Drip irrigation is known as one of the most effective irrigation systems in the world so far.

But remember that you should purchase quality pipes for the irrigation system to get the most out of it. Continue reading this article to learn what a drip irrigation system is and why you should apply it in agriculture.

What is Drip Irrigation?

This low-pressure system delivers the water to the crops’ roots. This system contains pipes, tubes and sprinklers. It is also known as a micro-irrigation system which provides water for long periods.

Drip irrigation systems enhance water efficiency of farmers by up to 70% compared to traditional irrigation methods and reduce energy costs by 50%. The quality pipes for the irrigation system are closed by the end cap, which pressures the water flow through the pipes. This pressure forces the water to spray over the targeted areas.

Remember that various types of pipes are necessary for this irrigation system. The most common types are galvanized iron and PVC. But apart from that, polyethylene is also used in this system. Farmers bury the drip irrigation pipes into the soil based on production practices, the ground and crop types.

What is the Importance of Drip Tape in this Irrigation system?

Drip tape is a particular method that sometimes is used in drip irrigation systems. Workers make a long and narrow cut inside the drip tube pipe, reducing individual emitters’ requirements. Farmers use drip tape for annual cut flower production. Remember that a drip irrigation system is installed, used and removed for only one season.

What are the Common Elements of a Drip Irrigation System?
Regardless of the additional features you use with a drip irrigation system, it has the same standard components. They are as follows:

1. Pumping System

The pumping system delivers the water from the source to the field. As we have discussed, drip irrigation system is a lower pressurized system; therefore, gravity can pressurize the drip lines. You can run the irrigation system with diesel, electrical or solar power.

2. Water Source

You can connect an irrigation ditch, pond or municipal water source with a garden hose. Remember that high iron in the water is unsuitable because it can clog emitters.

3. Distribution System

A distribution system carries water from the source to the field, connected to a mainline. This distribution system contains many PVC or other quality tubes to deliver the water to the area. Farmers can choose permanent or moveable pipes for the irrigation system based on the crops in production.

Get in Touch with Us

We know that the drip irrigation system is one of the most effective solutions for farming. But remember that compromising the quality of the irrigation system may decrease the overall result. If you want to purchase high-quality pipes at reasonable rates, contact us at Bison Pipe. Ring us at 800-764-7473 to know about the sprinkler pipe set price.